Xarig lagu xiray shirarka Shiinaha
88 Xirmooyinka hagaajinta dunta kombuyuutarku aad bay caan ugu yihiin dayactirka waxaana inta badan lagu isticmaalaa dukaamada mashiinka si ay u qabtaan hawlo ay ka mid yihiin biibiile iyo dayactirka dunta guud. Xirmooyinkan waxaa lagu qalabeeyay dhammaan qalabka lagama maarmaanka ah ee loo baahan yahay si loo soo celiyo kuwa la siibay, xiran, ama dunta dhaawacantay. Marka la rakibo, kuwan la geliyo waxay soo nooleeyaan dunta dhaawacantay, taasoo keentay in joogto ah, xaalad ka fiican sidii hore. Tani kaliya ma badbaadinayso kharashaadka laakiin sidoo kale waxay ka hortagtaa dib u dhac ku yimaada wax soo saarka.
Qalabka dayactirka dunta kasta waxa ku jira cabbirro kala duwan, oo ay la socdaan mandrel rakibaadda (nin faan ah), Dhamaadka dhagsiinta, Qool qoda, Qalabka jabinta ee Tang, iyo galinta dunta badan ee cabbir kasta. Qalabkan dhamaystiran wuxuu ka dhigayaa qalabka dayactirka dunta xalka ugu kharashka badan marka aad u baahan tahay qalab cabbirro kala duwan ah.
Astaamaha Muhiimka ah:
1.Ka-hortagga wakhtiga dhimista ee Mashiinka Qiimaha leh:
2.Xirmooyinkan waxaa loogu talagalay inay ka hortagaan wakhtiga dhimista mashiinka qaaliga ah, bixinta qalabyo kala duwan oo ku habboon baahiyaha kala duwan.
3.Qaabka Xidhmada Cabbirka Badan ee Kala Duwan:
4.Xirmooyinka waxay ku yimaadaan qaab cabbir oo kala duwan, iyaga oo ka dhigaya kuwo ku habboon codsiyada kala duwan.
5.Si Balaadhan Looga Faa'idaystay Aqoon-is-weydaarsiyada Dayactirka:
6.Xirmooyinka dayactirka dunta ayaa si weyn loogu isticmaalaa aqoon-is-weydaarsiyada dayactirka waxtarkooda iyo wax-qabadkooda awgeed.
Qiyaasta Farsamada:
| CUTHARS |  |
 |
 |
 |
 |
| Maqaal | |||||
| Number | HSS Helical Tap | HSS Qallooc Drill | Qalabka Gelida | Burburinta Tang | Gelida |
| Baas88g1 | M6*1 | 6.2mm | NO.6 | NO.6 | 25 |
| M8*1.25 | 8.3mm | NO.8 | NO.8 | 25 | |
| M10*1.5 | 10.3mm | NO.10 | NO.10 | 25 | |
| Baas88g2 | M10*1.5 | 10.3mm | NO.10 | NO.10 | 25 |
| M12*1.75 | 12.4mm | NO.12 | NO.12 | 25 | |
| M14*1.25 | 14.4mm | NO.14 | NO.14 | 25 | |
| Baas88c1 | 1/4-20UNC | 6.7mm | NO.9 | NO.9 | 25 |
| 5/16-18UNC | 8.3mm | NO.10 | NO.10 | 25 | |
| 3/8-16UNC | 9.9mm | NO.12 | NO.12 | 25 | |
| Baas88c2 | 5/16-18UNC | 8.3mm | NO.10 | NO.10 | 25 |
| 3/8-16UNC | 9.9mm | NO.12 | NO.12 | 25 | |
| 7/16-14UNC | 11.6mm | NO.14 | NO.14 | 25 | |
| 1/2-13UNC | 13.0mm | NO.15 | NO.15 | 25 | |
| BA88F1 | 1/4-28UNF | 6.7mm | NO.9 | NO.9 | 25 |
| 5/16-24UNF | 8.3mm | NO.11 | NO.11 | 25 | |
| 3/8-24UNF | 9.8mm | NO.13 | NO.13 | 25 | |
| Baas88f2 | 3/8-24UNF | 9.8mm | NO.13 | NO.13 | 25 |
| 7/16-20UNF | 11.5mm | NO.14 | NO.14 | 25 | |
| 1/2-20UNF | 13.0mm | NO.15 | NO.15 | 25 |
Waddamad
Ku baar QR code-ka QR ee WCHTAT