Otu esi ahọpụta ogologo ọ bụla nke waya erite maka oghere kpuru ìsì ?

Ịhọrọ ogologo nke eriri kwesịrị ekwesị na-etinye na oghere kpuru ìsì chọrọ ịtụle echiche olulu ahụ, Fanye nkọwapụta nwụnye, Isi nke aka, na bolt dabara. Ihe na-esonụ bụ nyocha zuru ezu:

1. Ọdịdị Omimi oghere kpuru ìsì na fanye nkọwapụta nwụnye

Ihe mejupụtara oghere oghere: Ngụkọta oghere oghere kpuru na-agụnye omimi chamfer, na ST irè eri omimi, na taper oghere omimi. Ọ bụrụ na ịdị irè ogologo nke eriri eriri ntinye bụ ihe na-erughị ST irè eri omimi, a gaghị etinye eriri ahụ nke ọma, ma ọ bụ eriri eri ma ọ bụ bolt agaghị enwe ike ịgafe.

Atụmatụ kachasị mma imewe:

Iwepu ma ọ bụ ibelata omimi oghere: Nke a na-echekwa oghere omimi oghere ma hụ na ọ dị omimi karịa maka ọgbọ eri dị irè.

Ịdị mkpụmkpụ Omimi Omimi Tapered: This can be achieved by adjusting the length of the taper’s front guide cone or milling to the bottom of the hole to reduce the depth occupied by the taper hole.

Managing the Mounting Shank: For wire thread inserts with tails, the taper hole depth must be at least equal to the mounting shank length to ensure the mounting shank does not bend if broken. II. Base Material Strength and Insert Length Selection

2. Relationship between Material Strength and Insert Length: The lower the base material strength, the longer the wire thread insert is required to ensure that the strength of the machine screw hole is greater than the strength of the screw.

Recommended Length Standards:

Mild-carbon steel substrates: Wire thread inserts with a length of 1.5d to 2d are suitable. Aluminum alloy substrates: Wire thread inserts with a length of 2d to 3d are recommended.
Composite substrates: Extra-long wire thread inserts with a length of 3d or longer should be used in conjunction with locking inserts (SL designation).

Bolt Fit and Insert Length Requirements:

Bolt Insert Depth: The length of the bolt threaded into the insert should be no less than 1.5 times the bolt diameter to ensure an effective connection.Matching Insert Length to Bolt Length: Select an insert of appropriate length based on the bolt length, ensuring that the bolt can fully penetrate the insert and leaving sufficient excess length.

Precautions for Practical Applications:

Handling Extreme Situations: In extreme situations, Enwere ike ịbawanye ogologo ntinye ntinye dị ka o kwere mee na-enweghị ịchụ àjà ike eri site na ịkwalite nhazi oghere nko ma jiri nlezianya na-achịkwa omimi oghere taper.. Mmekọrịta dị n'etiti ogologo mgbe echichi na ogologo na steeti free: Ogologo mgbe echichi ga-ebelata ma gbatịa n'ihi mmachi nke eriri dị n'ime na aka nke ịghasa., ma na-abụkarị karịa ogologo na steeti n'efu.