Common problems and solutions for Key locking insert

Během používání přípravku Keensert, Mohou se vyskytnout některé běžné problémy. Včasné odhalení a vyřešení těchto problémů může účinně zabránit poruchám zařízení a přerušení výroby.

1. Volné nitě:
Příčina: Loose threads may be caused by vibration, impact or loose latch keys.
Solution: First check whether the latch key is loose. If it is loose, re-tighten the latch key. If the latch key is normal, it may be caused by thread wear. You can consider replacing the Keensert.

2. Lock key falls off:
Příčina: The latch key may fall off due to improper installation or long-term use.
Solution: Reinstall the latch key to ensure that the latch key fully enters the keyway and is firmly pressed. If the latch key is damaged, a new latch key should be replaced in time.

3. Thread damage:
Příčina: Thread damage may be caused by excessive torque during installation, insufficient thread processing accuracy or long-term use.
Solution: Minor thread damage can be repaired with a repair tool. If the damage is severe, a new latch screw sleeve should be replaced.

4. Corrosion problem:
Příčina: Corrosion may be caused by the presence of a humid environment or corrosive media in the bolt sleeve.
Solution: For environments prone to corrosion, choose materials with better corrosion resistance, such as stainless steel or bronze. At the same time, regularly clean the corrosion products and apply anti-corrosion coating